M5 attendance terminal
Technical parameters:
- Display: LCD Touch 7", 800 x 480, capacitive, HDMI
- Power: 12V DC or PoE (IEEE 802.3af, IEEE 802.3at)
- Current draw: 1.25A
- Communication: Ethernet, encrypted TCP/IP
- Dimensions: w 192 x h 184 x d 102 mm
- Rating: IP30D
- Operating temperature range: -5°C to +40°C
- User supported software: PowerKey 3.0
- Sensor inputs: Wiegand 26, 34, 40
- Interface: 3x USB, Ethernet II 10/100
User Parameters:
- arrival/departure, 20 additional registrations
- option to connect an external sensor
- display of date, time, type of interruption, name of registrant and selected attendance information
- 2 independent relay outputs
- unit capacity 100,000 persons (per license)
- ETH connection, PoE power supply
- identification medium - RFID card or tag (EM 4102, MIFARE DESFire, Legic, HID, etc.)
- automatic registration to minimize errors and speed up check-in
Attendance terminal FX488
Technical parameters:
- Display: two-line alphanumeric LCD display
- Power supply voltage: 12V
- Current draw: 0.16 A DC
- Interface: RS485
- Dimensions: 94 x 159 x 29 mm
- Insulation: IP30
- Operating temperature range: 5°C to +30°C
- User supported software: Powerkey 3.0
- Possible chip formats: EM 4102, MIFARE DESFire, Legic, HID, etc
User Parameters:
- Controls by 12-button membrane keypad. Buttons for Arrival, Departure, Balance, Leave, Doctor, Paragraph, Break, Lunch, Duty, two arrow buttons for selecting other possible optional departures.
- Ability to correct registration within the current minute interval
- Alphanumeric display shows date, time, name of the activity when selected on the keyboard
- Integrated memory for 4500 events allows short-term operation of the terminal in offline mode
- Possibility to connect an external sensor for easier registration of arrival or for controlling the entrance door lock
- Acoustic and optical signalling when a card is inserted
T51 attendance terminal
Technical parameters:
- Display: 2.42" high contrast OLED, 128x64 dot resolution
- Power supply voltage: 12V
- Current draw: 500mA
- Interface: 2x RJ45, 1x USB 2.0 (internal), WiFi 2.4GHz
- Dimensions: 190 x 150 x 30 mm
- Coverage: IP65 (front panel) or IP65 whole terminal
- Operating temperature range: -20°C to +50°C
- User supported software: Powerkey 3.0
- Possible chip formats: EM 4102, MIFARE DESFire, Legic, HID, etc
User Parameters:
- High-contrast and highly readable 2.42" OLED display
- 7 touch-sensitive attendance registration buttons with indicator LEDs, acoustic confirmation of key press and card read, button to display working balance
- Power the terminal with active PoE (according to IEEE 802.3af standard)
- Production standard with IP65 protection for front panel
- Open (online) event transfer to PowerKey with offline backup in case of connection failure
- Supports advanced networking technologies and remote firmware updates
- Option to connect an external sensor or E2 Relay Module